Skip to content

Ness County Fire and EMS Frequencies

Ness County in Kansas has 0 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Ness County Fire and EMS Frequencies

Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Ness County Fire talkgroup 2481 (hex 9b1).

  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ness County, start with the Ness City site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.2375, 852.9 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Ness County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Ness County FireNess County Fire – Dispatch24819b1D
Ness County FireNess County Fire – Tactical Channel24829b2D
Ness County FireNess County Fire – Tactical Channel24839b3D
Ness County EMSNess County EMS – Dispatch24849b4D
2 encrypted talkgroups (cannot be monitored)
Kansas Statewide Interoperable Communication System (KSICS) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Ness County HospitalGrisell Memorial Hospital ER – Patient Reports24859b5D Encrypted
Ness County HospitalNess County Hospital ER – Patient Reports24869b6D Encrypted

Radio system sites in Ness County

Program the control channel first; your scanner finds the voice channels from it.

Ness City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 25 (hex 19) · NAC 1B7
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ness County

Common questions

Do fire departments and EMS use a trunked radio system in Ness County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ness County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ness County?

For Ness County, start with the Ness City site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ness County fire and EMS talkgroups encrypted?

2 of the 6 talkgroups listed for Ness County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.