Skip to content

Corning Fire and EMS Frequencies

Corning in Nemaha County, Kansas has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Corning (Kansas Statewide Interoperable Communication System (KSICS)), about 4 miles away.

About Corning Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Corning: Nemaha County Fire 154.3250 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Corning Fire talkgroup 4570 (hex 11da).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup; Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Corning, start with the Corning site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 852.2375, 852.9 MHz.

Data updated .

Corning trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Corning FireCorning Fire457011daD

Nemaha County channels that also cover Corning

Fire Dispatch

Fire Dispatch frequencies for Nemaha County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nemaha County FireCounty Fire Tactical154.3250FMNKNIJ574
Nemaha County FireBern Fire Dispatch155.2500
In 151.1075
156.7 PLFMN—
Nemaha County FireCounty Fire Dispatch155.7750
In 153.7850
146.2 PLFMNKJI542

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Nemaha County EMSNemaha County EMS – Dispatch458511e9D

Nearest trunked radio sites

Distances are measured from the center of Corning.

Corning · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 10 (hex A) · NAC 1B2 · about 4 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Wheaton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 56 (hex 38) · NAC 1B0 · about 18 mi away
Control 854.3375, 855.4625
Voice 854.1125, 856.0625, 857.0625, 858.0625
Holton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 65 (hex 41) · NAC 1B0 · about 18 mi away
Control 854.5875, 855.2375
Voice 854.0375, 856.0375, 856.7125, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Corning?

We do not have a fire dispatch channel listed specifically for Corning. The county-level fire dispatch channels in the same county: Nemaha County Fire 154.3250 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Corning?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Corning?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Corning?

For Corning, start with the Corning site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Corning fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Corning are marked encrypted.