About Dunlap Fire and EMS Frequencies
Quick answer: Fire dispatch for Dunlap: Dunlap Fire 453.9000 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Morris County Fire talkgroup 4841 (hex 12e9).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Dunlap, start with the Allen site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 855.2375, 855.4875 MHz.
Data updated .
Dunlap conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dunlap Fire | Dunlap Fire – Dispatch | 453.9000 In 458.9000 | 156.7 PL | FMN | WNUA287 |
Morris County channels that also cover Dunlap
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dunlap Rural Fire - County Fire District 9 | Dunlap Rural Fire – County Fire District 9 – Dispatch | 453.9000 In 458.9000 | FMN | WNUA287 | |
| Morris County Fire | Morris County Fire – Dispatch | 154.7850 In 156.0300 | 107.2 PL | FMN | WPSQ854 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morris County Fire | Morris County Fire – Tactical Channel | 155.2500 | FMN | WPSQ854 | |
| Morris County Fire | Morris County Fire – Tactical Channel | 155.6850 | FMN | WPSQ854 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Morris County Fire | County Fire Operations | 4841 | 12e9 | D |
| Morris County EMS | Morris County EMS – Dispatch | 4838 | 12e6 | D |
Nearest trunked radio sites
Distances are measured from the center of Dunlap.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dunlap?
Fire dispatch channels listed for Dunlap: Dunlap Fire 453.9000 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Dunlap?
Yes. The county-level systems that cover Dunlap are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Dunlap?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Dunlap?
For Dunlap, start with the Allen site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 855.2375, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Dunlap fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Dunlap are marked encrypted.