Skip to content

Mitchell County Fire and EMS Frequencies

Mitchell County in Kansas has 0 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 22 cities and communities below for local fire departments and EMS agencies.

About Mitchell County Fire and EMS Frequencies

Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Mitchell County Fire talkgroup 4692 (hex 1254).

  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Mitchell County, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.3125, 852.6125 MHz.

Data updated .

Mitchell County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Mitchell County FireMitchell County Fire – Dispatch46921254D
Mitchell County EMSMitchell County EMS – Dispatch46931255D

Radio system sites in Mitchell County

Program the control channel first; your scanner finds the voice channels from it.

Beloit · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 23 (hex 17) · NAC 1B1
Control 852.3125, 852.6125
Voice 851.325, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Mitchell County

Common questions

Do fire departments and EMS use a trunked radio system in Mitchell County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Mitchell County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Mitchell County?

For Mitchell County, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Mitchell County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Mitchell County are marked encrypted.