Skip to content

Meade County Fire and EMS Frequencies

Meade County in Kansas has 3 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 10 cities and communities below for local fire departments and EMS agencies.

About Meade County Fire and EMS Frequencies

Quick answer: Fire dispatch for Meade County: Meade County Fire 155.7150 MHz, narrow FM, 103.5 PL. EMS dispatch for Meade County: Meade County EMS 462.9750 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Meade County Fire talkgroup 2950 (hex b86).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Meade County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Meade County, start with the Collano site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 851.55, 852.3375 MHz.

Data updated .

Meade County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County FireFire and Severe Weather Spotters155.7150
In 153.9950
103.5 PLFMNKNHH227

EMS Dispatch

EMS Dispatch frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County EMSMeade County EMS – Dispatch (Dispatch before Trunked System)462.9750
In 467.9750
FMNWPAD887

EMS Tactical

EMS Tactical frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County EMSMeade County EMS – Tactical Channel (before Trunked System)463.1750
In 468.1750
192.8 PLFMNWYR532

Meade County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Meade County FireCounty Fire Dispatch2950b86D
Meade County EMSMeade County EMS – Dispatch2953b89D

Meade County Public Safety

Meade County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Meade County FireMeade County Fire – Dispatch12078D
Meade County EMSMeade County EMS – Dispatch1106eD

Radio system sites in Meade County

Program the control channel first; your scanner finds the voice channels from it.

Collano · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 28 (hex 1C) · NAC 1B0
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Meade · Meade County Public Safety
Site 1 (hex 1)
Voice 453.1625, 453.5125, 453.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Meade County

Common questions

What frequency does the fire department use in Meade County?

Fire dispatch channels listed for Meade County: Meade County Fire 155.7150 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Meade County?

EMS dispatch channels listed for Meade County: Meade County EMS 462.9750 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Meade County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Meade County Public Safety: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Meade County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Meade County?

For Meade County, start with the Collano site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Meade County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Meade County are marked encrypted.

Are Meade County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Meade County are marked encrypted.