Skip to content

Logan County Fire and EMS Frequencies

Logan County in Kansas has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Logan County Fire and EMS Frequencies

Quick answer: Fire dispatch for Logan County: Logan County Fire 154.1000 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Logan County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Logan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County FireFire/EMS Dispatch154.1000
In 155.8650
FMNWQWL439

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Logan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County FireLogan County Fire – Fire Ground154.1600
In 150.7750
P25KAJ895

Radio system sites in Logan County

Program the control channel first; your scanner finds the voice channels from it.

Oakley · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 42 (hex 2A) · NAC 1B6
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Logan County

Common questions

What frequency does the fire department use in Logan County?

Fire dispatch channels listed for Logan County: Logan County Fire 154.1000 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Logan County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Logan County?

For Logan County, start with the Oakley site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Logan County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Logan County are marked encrypted.