Skip to content

Linn County Fire and EMS Frequencies

Linn County in Kansas has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 21 cities and communities below for local fire departments and EMS agencies.

About Linn County Fire and EMS Frequencies

Quick answer: Fire dispatch for Linn County: Linn County Fire 154.1900 MHz, NXDN48, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Linn County EMS talkgroup 688 (hex 2b0).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Linn County, start with the Parker site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 851.7125, 852.4875 MHz.

Data updated .

Linn County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County FireLinn County Fire – Dispatch154.1900
In 158.7825
NXDN48WPZR391

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County FireLinn County Fire – Fire Ground153.9500
In 155.9025
115 DPLFMNWPZR391

Linn County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Linn County EMSLinn County EMS – Dispatch6882b0D
Linn County EMSLinn County EMS – Tactical Channel6892b1D

Radio system sites in Linn County

Program the control channel first; your scanner finds the voice channels from it.

Parker · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 7 (hex 7) · NAC 1BA
Control 851.7125, 852.4875
Voice 851.4625, 852.15, 852.775, 853.425, 853.575, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Linn County

Common questions

What frequency does the fire department use in Linn County?

Fire dispatch channels listed for Linn County: Linn County Fire 154.1900 MHz, NXDN48, no tone.

Do fire departments and EMS use a trunked radio system in Linn County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Linn County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Linn County?

For Linn County, start with the Parker site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7125, 852.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Linn County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Linn County are marked encrypted.

Are Linn County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Linn County are marked encrypted.