Skip to content

Lane County Fire and EMS Frequencies

Lane County in Kansas has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Lane County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lane County: Lane County Fire 154.1450 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Lane County Hospital talkgroup 2441 (hex 989).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lane County, start with the Dighton site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.1125, 852.4125 MHz.

Data updated .

Lane County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lane County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lane County FireLane County Fire – Dispatch154.1450
In 158.8650
FMNWQCI323

Lane County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Lane County HospitalHospital ER – Patient Reports2441989D

Radio system sites in Lane County

Program the control channel first; your scanner finds the voice channels from it.

Dighton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 29 (hex 1D) · NAC 1B1
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lane County

Common questions

What frequency does the fire department use in Lane County?

Fire dispatch channels listed for Lane County: Lane County Fire 154.1450 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Lane County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lane County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lane County?

For Lane County, start with the Dighton site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lane County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Lane County are marked encrypted.

Are Lane County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Lane County are marked encrypted.