Skip to content

Hodgeman County Fire and EMS Frequencies

Hodgeman County in Kansas has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Hodgeman County Fire and EMS Frequencies

Quick answer: Fire dispatch for Hodgeman County: Hodgeman County Fire 155.7600 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Hodgeman County Fire talkgroup 631 (hex 277).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hodgeman County, start with the Jetmore site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.4875, 852.775 MHz.

Data updated .

Hodgeman County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hodgeman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hodgeman County FireHodgeman County Fire – Dispatch155.7600
In 153.8300
FMNWQBE434

Hodgeman County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hodgeman County FireFire and EMS Dispatch631277D

Radio system sites in Hodgeman County

Program the control channel first; your scanner finds the voice channels from it.

Jetmore · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 26 (hex 1A)
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Hodgeman County

Common questions

What frequency does the fire department use in Hodgeman County?

Fire dispatch channels listed for Hodgeman County: Hodgeman County Fire 155.7600 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Hodgeman County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hodgeman County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hodgeman County?

For Hodgeman County, start with the Jetmore site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hodgeman County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Hodgeman County are marked encrypted.

Are Hodgeman County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Hodgeman County are marked encrypted.