Skip to content

Haskell County Fire and EMS Frequencies

Haskell County in Kansas has 2 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Haskell County Fire and EMS Frequencies

Quick answer: Fire dispatch for Haskell County: Haskell County Fire 453.8000 MHz, narrow FM, no tone. EMS dispatch for Haskell County: Haskell County EMS 462.9500 MHz, narrow FM, CSQ. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Haskell County EMS talkgroup 524 (hex 20c).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Haskell County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Haskell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Haskell County FireHaskell County Fire – Dispatch (Dispatch before KSICS)453.8000
In 458.8000
FMNWPYE258

EMS Dispatch

EMS Dispatch frequencies for Haskell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Haskell County EMSHaskell County EMS – Dispatch (Dispatch before KSICS)462.9500
In 467.9500
CSQFMNWNII782

Haskell County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Haskell County EMSHaskell County EMS – Dispatch52420cD
Haskell County EMSHaskell County EMS – Page53821aD
Haskell County EMSHaskell County EMS – Tactical Channel52520dD
Haskell County EMSEMS Medical52620eD

Radio system sites in Haskell County

Program the control channel first; your scanner finds the voice channels from it.

Sublette · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 60 (hex 3C)
Voice 856.4625, 857.4625, 857.9625, 858.4625, 859.4625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Haskell County

Common questions

What frequency does the fire department use in Haskell County?

Fire dispatch channels listed for Haskell County: Haskell County Fire 453.8000 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Haskell County?

EMS dispatch channels listed for Haskell County: Haskell County EMS 462.9500 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Haskell County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Haskell County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

Are Haskell County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Haskell County are marked encrypted.

Are Haskell County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Haskell County are marked encrypted.