Skip to content

Anthony Fire and EMS Frequencies

Anthony in Harper County, Kansas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Caldwell (Kansas Statewide Interoperable Communication System (KSICS)), about 24 miles away.

About Anthony Fire and EMS Frequencies

Quick answer: Fire dispatch for Anthony: Anthony Fire 453.4250 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Anthony: Harper County EMS 453.0750 MHz, narrow FM, 173.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Harper County Fire talkgroup 2661 (hex a65).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Anthony conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Anthony
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anthony FireAnthony Fire – Dispatch453.4250
In 458.4250
114.8 PLFMNKNAY821

Harper County channels that also cover Anthony

Fire Dispatch

Fire Dispatch frequencies for Harper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harper County FireHarper County Fire – Dispatch453.8000
In 458.8000
173.8 PLFMNWPDG447

EMS Dispatch

EMS Dispatch frequencies for Harper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harper County EMSHarper County EMS – Dispatch453.0750
In 458.0750
173.8 PLFMNWPCR921

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Harper County FireCounty Fire Dispatch2661a65D
Harper County EMSHarper County EMS – Dispatch2660a64D

Nearest trunked radio sites

Distances are measured from the center of Anthony.

Caldwell · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 65 (hex 41) · NAC 1B0 · about 24 mi away
Voice 856.0875, 856.9375, 858.0375, 858.7125, 859.2375, 859.9875
Sharon · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 18 (hex 12) · about 24 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Mayfield · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 14 (hex E) · NAC 1B7 · about 27 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Anthony?

Fire dispatch channels listed for Anthony: Anthony Fire 453.4250 MHz, narrow FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Anthony?

We do not have a EMS dispatch channel listed specifically for Anthony. The county-level EMS dispatch channels in the same county: Harper County EMS 453.0750 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Anthony?

Yes. The county-level systems that cover Anthony are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Anthony?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Anthony?

For Anthony, start with the Sharon site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Anthony fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Anthony are marked encrypted.