Skip to content

Ellsworth County Fire and EMS Frequencies

Ellsworth County in Kansas has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 26 cities and communities below for local fire departments and EMS agencies.

About Ellsworth County Fire and EMS Frequencies

Quick answer: Fire dispatch for Ellsworth County: Ellsworth County Fire 155.5200 MHz, narrow FM, 023 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Ellsworth County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ellsworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ellsworth County FireFire and EMS Page Out155.5200
In 158.9700
023 DPLFMNWPJX481

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ellsworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ellsworth County FireFire and EMS154.7250FMNWPJX481

Hospitals & Medical

Hospitals & Medical frequencies for Ellsworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ellsworth County HospitalEMS-to-Hospital463.0500
In 468.0500
FMNWNBG886

Radio system sites in Ellsworth County

Program the control channel first; your scanner finds the voice channels from it.

Ellsworth · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 24 (hex 18) · NAC 1BE
Control 851.55, 851.7625
Voice 851.1875, 852.3375, 853.175, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ellsworth County

Common questions

What frequency does the fire department use in Ellsworth County?

Fire dispatch channels listed for Ellsworth County: Ellsworth County Fire 155.5200 MHz, narrow FM, 023 DPL.

What scanner do I need to listen to fire and EMS in Ellsworth County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Ellsworth County?

For Ellsworth County, start with the Ellsworth site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 851.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ellsworth County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Ellsworth County are marked encrypted.