About Ellis County Fire and EMS Frequencies
Quick answer: Fire dispatch for Ellis County: Ellis County Fire 154.4450 MHz, narrow FM, no tone. Trunked: Ellis County, for example Ellis County Fire talkgroup 102 (hex 66).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ellis County: 7 talkgroups; Kansas Statewide Interoperable Communication System (KSICS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ellis County, start with the Site 1 site of Ellis County. Its control channels: 856.7625, 857.2125, 857.7625 MHz.
- 5 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Ellis County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ellis County Fire | Fire Tone Out | 154.4450 In 153.7700 | FMN | WSB818 |
Ellis County trunked talkgroups
Ellis County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ellis County Fire | Fire/EMS Dispatch | 102 | 66 | D |
| Ellis County Fire | Ellis County Fire – Tactical Channel | 104 | 68 | D |
| Ellis County Fire | Ellis County Fire – Tactical Channel | 106 | 6a | D |
| Ellis County Fire | Ellis County Fire – Tactical Channel | 110 | 6e | D |
| Ellis County Fire | County Fire Private | 112 | 70 | D |
| Ellis County EMS | Ellis County EMS – Tactical Channel | 138 | 8a | D |
| Ellis County Hospital | EMS to Hospital for Patient Reports | 3626 | e2a | D |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ellis County Fire | Fire/EMS Tactical | 4616 | 1208 | D |
| Ellis County Fire | Fire/EMS Tactical | 4617 | 1209 | D |
| Ellis County Fire | Fire/EMS Tactical | 4618 | 120a | D |
| Ellis County EMS | Ellis County EMS – Tactical Channel | 4630 | 1216 | D |
5 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ellis County Fire | Fire/EMS Dispatch | 4613 | 1205 | D Encrypted |
| Ellis (city) - Ellis County | Ellis (city) – Ellis County – Tactical Channel | 4625 | 1211 | D Encrypted |
| Ellis County Fire | Fire/EMS Tactical | 4614 | 1206 | D Encrypted |
| Ellis County Fire | Fire/EMS Tactical | 4615 | 1207 | D Encrypted |
| Ellis County Fire | Ellis County Fire – Tactical Channel | 4626 | 1212 | D Encrypted |
Radio system sites in Ellis County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Ellis County
Common questions
What frequency does the fire department use in Ellis County?
Fire dispatch channels listed for Ellis County: Ellis County Fire 154.4450 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Ellis County?
Yes. Fire and EMS talkgroups are listed for Ellis County: 7 talkgroups; Kansas Statewide Interoperable Communication System (KSICS): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Ellis County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Ellis County?
For Ellis County, start with the Site 1 site of Ellis County. Its control channels are 856.7625, 857.2125, 857.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Ellis County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Ellis County are marked encrypted.
Are Ellis County fire and EMS talkgroups encrypted?
5 of the 16 talkgroups listed for Ellis County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.