About Cloud County Fire and EMS Frequencies
Quick answer: Fire dispatch for Cloud County: Cloud County Fire 155.9625 MHz, narrow FM, 114.8 PL. EMS dispatch for Cloud County: Milonvale EMS 154.9800 MHz, NXDN48, RAN 14.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Cloud County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cloud County Fire | Cloud County Fire – Dispatch | 155.9625 In 153.9950 | 114.8 PL | FMN | KLJ249 |
| Cloud County Fire | Sheriff and Fire | 158.7975 | NXDN48 | WRNZ209 | |
| Cloud County Fire | Sheriff and Fire | 158.8275 | NXDN48 | WRNZ209 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Milonvale EMS | Milonvale EMS – Dispatch | 154.9800 In 153.9200 | RAN 14 | NXDN48 | WPAS847 |
Radio system sites in Cloud County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cloud County
- Ames
- Arion
- Aurora
- Buffalo
- Center
- Clyde
- Colfax
- Como
- Concordia
- Cook
- Cool
- Elk
- Glasco
- Grant
- Hannum
- Hollis
- Huscher
- Jamestown
- Lawrence
- Lawrenceburg
- Lincoln
- Lyon
- Macyville
- Meredith
- Miltonvale
- Minersville
- Nelson
- Oakland
- Oneonta
- Princeville
- Rice
- Rosaco
- Saint Joseph
- Shirley
- Sibley
- Simpson
- Solomon
- Starr
- Sulphur Springs
- Summit
- Yuma
Common questions
What frequency does the fire department use in Cloud County?
Fire dispatch channels listed for Cloud County: Cloud County Fire 155.9625 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Cloud County?
EMS dispatch channels listed for Cloud County: Milonvale EMS 154.9800 MHz, NXDN48, RAN 14.
What scanner do I need to listen to fire and EMS in Cloud County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Cloud County?
For Cloud County, start with the Concordia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cloud County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Cloud County are marked encrypted.