About Clark County Fire and EMS Frequencies
Quick answer: Fire dispatch for Clark County: Clark County Fire 154.1150 MHz, narrow FM, 151.4 PL. EMS dispatch for Clark County: Clark County EMS 155.4000 MHz, narrow FM, 127.3 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Clark County Fire talkgroup 2450 (hex 992).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clark County, start with the Ashland site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 851.7375, 852.0625 MHz.
Data updated .
Clark County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clark County Fire | County/Ashland Fire Dispatch | 154.1150 In 158.7600 | 151.4 PL | FMN | WQDM882 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clark County EMS | Clark County EMS – Dispatch | 155.4000 In 150.7750 | 127.3 PL | FMN | KNNG219 |
Clark County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clark County Fire | Mineola Fire Dispatch | 2450 | 992 | D |
| Clark County EMS | Clark County EMS – Dispatch | 2448 | 990 | D |
Radio system sites in Clark County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Clark County
Common questions
What frequency does the fire department use in Clark County?
Fire dispatch channels listed for Clark County: Clark County Fire 154.1150 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Clark County?
EMS dispatch channels listed for Clark County: Clark County EMS 155.4000 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Clark County?
Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Clark County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clark County?
For Clark County, start with the Ashland site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Clark County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Clark County are marked encrypted.
Are Clark County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Clark County are marked encrypted.