Skip to content

Cheyenne County Fire and EMS Frequencies

Cheyenne County in Kansas has 0 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Cheyenne County Fire and EMS Frequencies

Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Cheyenne County Fire talkgroup 4598 (hex 11f6).

  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cheyenne County, start with the St Francis site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 851.7375, 852.0625 MHz.

Data updated .

Cheyenne County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Cheyenne County FireCounty Fire459811f6D
Cheyenne County EMSCounty EMS460111f9D
Cheyenne County EMSCounty EMS Tactical460211faD
Cheyenne County HospitalCounty Hospital ER – Patient Reports460311fbD

Radio system sites in Cheyenne County

Program the control channel first; your scanner finds the voice channels from it.

St Francis · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 40 (hex 28) · NAC 1BA
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cheyenne County

Common questions

Do fire departments and EMS use a trunked radio system in Cheyenne County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cheyenne County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cheyenne County?

For Cheyenne County, start with the St Francis site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cheyenne County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Cheyenne County are marked encrypted.