About Cherokee County Fire and EMS Frequencies
Quick answer: Fire dispatch for Cherokee County: Cherokee County Fire 157.4500 MHz, narrow FM, 82.5 PL. EMS dispatch for Cherokee County: Cherokee County EMS 458.4000 MHz, narrow FM, 77.0 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Cherokee County EMS talkgroup 2515 (hex 9d3).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cherokee County, start with the West Mineral site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.2375, 852.9 MHz.
Data updated .
Cherokee County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County Fire | County Paging | 157.4500 | 82.5 PL | FMN | WQDW900 |
| Cherokee County Fire | County Fire North | 460.1875 In 465.1875 | 151.4 PL | FMN | WQGA528 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cherokee County EMS | Cherokee County EMS – Tone Out | 458.4000 | 77.0 PL | FMN | WQDW900 |
| Cherokee County EMS | Cherokee County EMS – Dispatch (Columbus) – Linked to KSICS | 461.0500 In 466.0500 | 151.4 PL | FMN | KNJT518 |
| Cherokee County EMS | Cherokee County EMS – Dispatch (Galena) | 461.2250 In 466.2250 | 151.4 PL | FMN | KNBP769 |
Cherokee County trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cherokee County EMS | EMS Tone Out | 2515 | 9d3 | D |
| Cherokee County EMS | Cherokee County EMS – Dispatch | 2516 | 9d4 | D |
Radio system sites in Cherokee County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cherokee County
- Baxter Springs
- Carona
- Cherokee
- Columbus
- Cravensville
- Crawford
- Crestline
- Empire City
- Faulkner
- Galena
- Garden
- Hallowell
- Lawton
- Leawalk
- Lola
- Lowell
- Lyon
- Melrose
- Military
- Mineral
- Naylor
- Neosho
- Neutral
- Oswego
- Pleasant View
- Quaker
- Riverton
- Roseland
- Ross
- Salamanca
- Scammon
- Shawnee
- Sheridan
- Sherman
- Sherwin
- Skidmore
- Spring Valley
- Stippville
- Turck
- Weir
- West Mineral
Common questions
What frequency does the fire department use in Cherokee County?
Fire dispatch channels listed for Cherokee County: Cherokee County Fire 157.4500 MHz, narrow FM, 82.5 PL.
What frequency does EMS or the ambulance service use in Cherokee County?
EMS dispatch channels listed for Cherokee County: Cherokee County EMS 458.4000 MHz, narrow FM, 77.0 PL.
Do fire departments and EMS use a trunked radio system in Cherokee County?
Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Cherokee County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cherokee County?
For Cherokee County, start with the West Mineral site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cherokee County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Cherokee County are marked encrypted.
Are Cherokee County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Cherokee County are marked encrypted.