Skip to content

Wonsevu Fire and EMS Frequencies

We do not have frequencies listed specifically for Wonsevu in Chase County, Kansas yet. Countywide channels for Chase County that may also cover this area are shown below when we have them.

About Wonsevu Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Wonsevu: Chase County Fire 453.1750 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Chase County Fire talkgroup 4446 (hex 115e).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Chase County channels that also cover Wonsevu

Fire Dispatch

Fire Dispatch frequencies for Chase County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chase County FireChase County Fire – Dispatch453.1750
In 458.1750
156.7 PLFMNKNNJ576

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Chase County FireCounty Fire Dispatch4446115eD
Chase County EMSChase County EMS – Dispatch44571169D

Common questions

What frequency does the fire department use in Wonsevu?

We do not have a fire dispatch channel listed specifically for Wonsevu. The county-level fire dispatch channels in the same county: Chase County Fire 453.1750 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Wonsevu?

Yes. The county-level systems that cover Wonsevu are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wonsevu?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.