Skip to content

Barton County Fire and EMS Frequencies

Barton County in Kansas has 2 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 38 cities and communities below for local fire departments and EMS agencies.

About Barton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Barton County: Barton County Fire 453.4000 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Barton County Fire talkgroup 2526 (hex 9de).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Barton County, start with the Great Bend site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.1125, 852.4125, 852.75 MHz.

Data updated .

Barton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Barton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barton County FireFire and EMS tone out453.4000
In 458.4000
156.7 PLFMNWNPI458

Hospitals & Medical

Hospitals & Medical frequencies for Barton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barton County HospitalEMS to Hospital462.9750
In 467.9750
156.7 PLFMNWXP403

Barton County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Barton County FireFire and EMS Dispatch25269deD
Barton County FireCounty Fire2088828D
Barton County FireCounty Fire2089829D
Barton County HospitalGreat Bend Hospital ER6802a8D
Barton County HospitalEllinwood Hospital61530f05aD

Radio system sites in Barton County

Program the control channel first; your scanner finds the voice channels from it.

Great Bend · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 19 (hex 13) · NAC 1B5
Control 852.1125, 852.4125, 852.75
Voice 851.8, 853.475, 853.9
Great Bend South · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 58 (hex 3A) · NAC 1B5
Control 856.9625, 857.4625
Voice 856.4625, 857.9625, 858.7375, 858.9875
Susank · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 59 (hex 3B) · NAC 1B0
Control 856.7375, 857.2625
Voice 856.2625, 857.7375, 858.2625, 858.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Barton County

Common questions

What frequency does the fire department use in Barton County?

Fire dispatch channels listed for Barton County: Barton County Fire 453.4000 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Barton County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Barton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Barton County?

For Barton County, start with the Great Bend site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125, 852.75 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Barton County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Barton County are marked encrypted.

Are Barton County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Barton County are marked encrypted.