Skip to content

Barber County Fire and EMS Frequencies

Barber County in Kansas has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 24 cities and communities below for local fire departments and EMS agencies.

About Barber County Fire and EMS Frequencies

Quick answer: Fire dispatch for Barber County: Barber County Fire 453.5250 MHz, narrow FM, 452 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Barber County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Barber County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barber County FireBarber County Fire – East Dispatch453.5250
In 458.5250
452 DPLFMNWPCP688
Barber County FireBarber County Fire – West Dispatch453.9750
In 458.9750
FMNWPCP688

Radio system sites in Barber County

Program the control channel first; your scanner finds the voice channels from it.

Sharon · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 18 (hex 12)
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Barber County

Common questions

What frequency does the fire department use in Barber County?

Fire dispatch channels listed for Barber County: Barber County Fire 453.5250 MHz, narrow FM, 452 DPL.

What scanner do I need to listen to fire and EMS in Barber County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Barber County?

For Barber County, start with the Sharon site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Barber County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Barber County are marked encrypted.