About Worth County Fire and EMS Frequencies
Quick answer: Fire dispatch for Worth County: Worth County Fire 154.2050 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Worth County Fire talkgroup 64626 (hex fc72).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Worth County, start with the Northwood site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 770.96875, 774.59375, 774.84375 MHz.
Data updated .
Worth County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Worth County Fire | Worth County Fire – Dispatch – 67.0 PL on input | 154.2050 In 158.9250 | FM | WPYC648 | |
| Worth County Fire | Fire RF Link | 460.5875 In 465.5875 | FM | WPYC648 |
Worth County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Worth County Fire | Worth County Fire – Dispatch | 64626 | fc72 | T |
| Worth County Fire | Fire Operations | 64627 | fc73 | T |
| Worth County Fire | Fire Operations | 64628 | fc74 | T |
Radio system sites in Worth County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Worth County
Common questions
What frequency does the fire department use in Worth County?
Fire dispatch channels listed for Worth County: Worth County Fire 154.2050 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Worth County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Worth County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Worth County?
For Worth County, start with the Northwood site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.96875, 774.59375, 774.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Worth County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Worth County are marked encrypted.
Are Worth County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Worth County are marked encrypted.