Skip to content

Webster County Fire and EMS Frequencies

Webster County in Iowa has 9 countywide conventional frequencies and 9 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Webster County Fire and EMS Frequencies

Quick answer: Fire dispatch for Webster County: Webster County Fire 154.3700 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Webster County Fire talkgroup 61929 (hex f1e9).

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Webster County, start with the Fort Dodge site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 773.84375, 774.09375, 774.34375 MHz.

Data updated .

Webster County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County FireWebster County Fire – Dispatch – 146.2 PL used for voice ops154.3700
In 153.9800
CSQFMNWQGC314
Webster County FireFire Relay – Vincent Tower453.1500186.2 PLFMNWQKF638
Webster County FireFire Relay – Dayton Tower453.1625131.8 PLFMNWQKF638
Webster County FireFire Relay – Barnum Tower453.2250123.0 PLFMNWQKF638
Webster County FireFire Relay – Gowrie Tower453.3125162.2 PLFMNWQKF638
Webster County FireFire Relay – Lehigh Tower453.3375173.8 PLFMNWQKF638
Webster County FireFire Relay – Duncombe Tower453.7375141.3 PLFMNWQKF638

EMS Tactical

EMS Tactical frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County EMSRegional EMS, Response – Mobiles use 192.8 PL155.2050CSQFMNKLV943

EMS Talk-around

EMS Talk-around frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County EMSRegional EMS155.4000FMNKLV943

Webster County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Webster County FireCounty Fire Operations61929f1e9T
Webster County FireCallendar Fire Dispatch61949f1fdT
Webster County FireMoreland Fire Dispatch61960f208T
Webster County FireStratford Fire and Rescue Dispatch61964f20cT
Webster County FireFire All Call61965f20dT
Webster County FireCounty Fire61926f1e6T
Webster County FireCounty Fire61927f1e7T
Webster County FireCounty Fire61928f1e8T
Webster County FireCounty Fire Training61930f1eaT

Radio system sites in Webster County

Program the control channel first; your scanner finds the voice channels from it.

Fort Dodge · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 35 (hex 23) · NAC 4C0
Control 773.84375, 774.09375, 774.34375
Voice 773.09375, 773.34375, 773.59375
Harcourt · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 94 (hex 5E) · NAC 4C1
Control 769.94375, 770.19375, 770.44375
Voice 769.69375
Lehigh · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 150 (hex 96) · NAC 4C7
Control 774.19375, 774.38125, 774.89375
Voice 773.95625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Webster County

Common questions

What frequency does the fire department use in Webster County?

Fire dispatch channels listed for Webster County: Webster County Fire 154.3700 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Webster County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Webster County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Webster County?

For Webster County, start with the Fort Dodge site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.84375, 774.09375, 774.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Webster County fire and EMS frequencies encrypted?

None of the 9 conventional frequencies listed for Webster County are marked encrypted.

Are Webster County fire and EMS talkgroups encrypted?

None of the 9 talkgroups listed for Webster County are marked encrypted.