Skip to content

Seymour Fire and EMS Frequencies

We do not have frequencies listed specifically for Seymour in Wayne County, Iowa yet. Countywide channels for Wayne County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Centerville (Iowa Statewide Interoperable Communications System (ISICS)), about 13 miles away.

About Seymour Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Seymour: Wayne County Fire 154.4450 MHz, narrow FM, 167.9 PL.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Wayne County channels that also cover Seymour

Fire Dispatch

Fire Dispatch frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wayne County FireWayne County Fire – Dispatch154.4450167.9 PLFMNWXT865
Wayne County FireFire RF Link453.0750FMNWQEH242
Wayne County FireFire RF Link453.3000FMNWQEH242
Wayne County FireFire RF Link453.5250FMNWQEH242
Wayne County FireFire RF Link458.0750FMNWQEH242
Wayne County FireFire RF Link458.3000FMNWQEH242
Wayne County FireFire RF Link458.5250FMNWQEH242

EMS Tactical

EMS Tactical frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wayne County EMSWayne County EMS – Tactical Channel155.2200CSQFMNKNAI229

Nearest trunked radio sites

Distances are measured from the center of Seymour.

Centerville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 7 (hex 7) · NAC 4C2 · about 13 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
Chariton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 60 (hex 3C) · NAC 4C6 · about 23 mi away
Control 769.93125, 770.18125, 770.43125
Voice 769.68125
Albia · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 4 (hex 4) · NAC 4C4 · about 28 mi away
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Seymour?

We do not have a fire dispatch channel listed specifically for Seymour. The county-level fire dispatch channels in the same county: Wayne County Fire 154.4450 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Seymour?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Seymour?

For Seymour, start with the Centerville site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.84375, 774.09375, 774.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.