Skip to content

Hull Fire and EMS Frequencies

Hull in Sioux County, Iowa has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Rock Rapids (Iowa Statewide Interoperable Communications System (ISICS)), about 13 miles away.

About Hull Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hull: Sioux County Fire 154.1900 MHz, FM, CSQ.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Hull conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hull
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hull FirePublic Works / Fireground158.8200
In 153.9650
DMRWPFC542

Sioux County channels that also cover Hull

Fire Dispatch

Fire Dispatch frequencies for Sioux County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sioux County FireFire Paging154.1900CSQFMKSJ369
Sioux County FireFire Response154.1900
In 159.0450
94.8 PLFMKSJ369

Hospitals & Medical

Hospitals & Medical frequencies for Sioux County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sioux County HospitalSioux County Hospital – Iowa Regional ("3A" or "EMS 4" or "EMS 400")155.400082.5 PLFMWQE956

Nearest trunked radio sites

Distances are measured from the center of Hull.

Rock Rapids · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 51 (hex 33) · NAC 4C2 · about 13 mi away
Control 773.34375, 774.59375, 774.84375
Voice 773.09375
Sanborn · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 71 (hex 47) · about 25 mi away
Control 770.40625
Voice 769.15625, 769.40625, 769.65625, 769.90625, 770.15625
Le Mars · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 74 (hex 4A) · NAC 4C2 · about 29 mi away
Control 770.20625, 770.45625, 770.95625
Voice 769.95625, 770.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hull?

We do not have a fire dispatch channel listed specifically for Hull. The county-level fire dispatch channels in the same county: Sioux County Fire 154.1900 MHz, FM, CSQ.

What scanner do I need to listen to fire and EMS in Hull?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Hull?

For Hull, start with the Rock Rapids site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.34375, 774.59375, 774.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hull fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Hull are marked encrypted.