Skip to content

Ringgold County Fire and EMS Frequencies

Ringgold County in Iowa has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Ringgold County Fire and EMS Frequencies

Quick answer: Fire dispatch for Ringgold County: Ringgold County Fire 154.3850 MHz, narrow FM, 127.3 PL. EMS dispatch for Ringgold County: Ringgold County EMS 155.8650 MHz, P25, NAC 4C3. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Ringgold County Fire talkgroup 54306 (hex d422).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ringgold County, start with the Mt. Ayr site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 773.84375, 774.09375, 774.34375 MHz.

Data updated .

Ringgold County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ringgold County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ringgold County FireRinggold County Fire – Dispatch154.3850
In 150.8050
127.3 PLFMNWQL956

EMS Dispatch

EMS Dispatch frequencies for Ringgold County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ringgold County EMSRinggold County EMS – Dispatch155.8650NAC 4C3P25WPKY728

Ringgold County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Ringgold County FireFire Calling54306d422T

Radio system sites in Ringgold County

Program the control channel first; your scanner finds the voice channels from it.

Mt. Ayr · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 77 (hex 4D) · NAC 4C0
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ringgold County

Common questions

What frequency does the fire department use in Ringgold County?

Fire dispatch channels listed for Ringgold County: Ringgold County Fire 154.3850 MHz, narrow FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Ringgold County?

EMS dispatch channels listed for Ringgold County: Ringgold County EMS 155.8650 MHz, P25, NAC 4C3.

Do fire departments and EMS use a trunked radio system in Ringgold County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ringgold County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ringgold County?

For Ringgold County, start with the Mt. Ayr site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.84375, 774.09375, 774.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ringgold County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Ringgold County are marked encrypted.

Are Ringgold County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Ringgold County are marked encrypted.