About Polk County Fire and EMS Frequencies
Quick answer: Fire dispatch for Polk County: Polk County Fire 151.4600 MHz, narrow FM, CSQ; Westcom Fire 155.8050 MHz, narrow FM, 127.3 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Polk Des Moines Airport talkgroup 49808 (hex c290).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Polk County, start with the Des Moines/WESTCOM Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 854.1375, 856.5875, 859.9625 MHz.
- 5 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Polk County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Polk County Fire | Fire Paging/Dispatch – Patched to SARA | 151.4600 | CSQ | FMN | WYK686 |
| Westcom Fire | Westcom Fire – Dispatch | 155.8050 | 127.3 PL | FMN | WQRM649 |
Polk County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Polk Des Moines Airport | Aircraft Rescue and Fire Fighting | 49808 | c290 | T |
| Polk Westcom Fire | FIRE Training | 1509 | 5e5 | D |
| Polk UnityPoint Health | Hospital Dispatch Statewide | 48681 | be29 | T |
| Polk UnityPoint Health | Des Moines Ambulances | 48673 | be21 | T |
5 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Polk Westcom Fire | Polk Westcom Fire – Dispatch | 175 | af | D Encrypted |
| Polk Westcom Fire | Polk Westcom Fire – Fire Ground | 177 | b1 | D Encrypted |
| Polk Westcom Fire | Fire/EMS 3E | 179 | b3 | D Encrypted |
| Polk Westcom Fire | FIRE/EMS ALL | 199 | c7 | D Encrypted |
| Polk Westcom EMS | Hospitals Interop | 113 | 71 | D Encrypted |
Radio system sites in Polk County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Polk County
Common questions
What frequency does the fire department use in Polk County?
Fire dispatch channels listed for Polk County: Polk County Fire 151.4600 MHz, narrow FM, CSQ; Westcom Fire 155.8050 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Polk County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Polk County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Polk County?
For Polk County, start with the Des Moines/WESTCOM Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 854.1375, 856.5875, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Polk County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Polk County are marked encrypted.
Are Polk County fire and EMS talkgroups encrypted?
5 of the 9 talkgroups listed for Polk County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.