About Page County Fire and EMS Frequencies
Quick answer: Fire dispatch for Page County: Page County Fire 154.3400 MHz, narrow FM, 100.0 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Page County Fire talkgroup 46418 (hex b552).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Page County, start with the Page Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 769.90625, 770.15625, 770.40625 MHz.
Data updated .
Page County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Page County Fire | Page County Fire – Dispatch – Clarinda Repeater | 154.3400 In 158.9850 | 100.0 PL | FMN | KAB233 |
| Page County Fire | Page County Fire – Paging | 155.4375 In 153.9050 | FMN | WQOB924 | |
| Page County Fire | Page County Fire – Dispatch – Shenandoah Repeater | 155.8050 In 150.8050 | 100.0 PL | FMN | WNLG686 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Page County Fire | Ground Operations | 157.2250 | 100.0 PL | FMN | — |
Page County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Page County Fire | East | 46418 | b552 | T |
| Page County Fire | West | 46455 | b577 | T |
| Page County Fire | Page County Fire – Fire Ground | 46419 | b553 | T |
Radio system sites in Page County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Page County
Common questions
What frequency does the fire department use in Page County?
Fire dispatch channels listed for Page County: Page County Fire 154.3400 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Page County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Page County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Page County?
For Page County, start with the Page Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.90625, 770.15625, 770.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Page County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Page County are marked encrypted.
Are Page County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Page County are marked encrypted.