Skip to content

Montgomery County Fire and EMS Frequencies

Montgomery County in Iowa has 3 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Montgomery County Fire and EMS Frequencies

Quick answer: Fire dispatch for Montgomery County: Montgomery County Fire 155.8650 MHz, FM, no tone. EMS dispatch for Montgomery County: Montgomery County EMS 155.2350 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Montgomery County Fire talkgroup 45023 (hex afdf).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Montgomery County, start with the Montgomery Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 770.93125, 774.55625, 774.80625 MHz.

Data updated .

Montgomery County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County FireMontgomery County Fire – Dispatch155.8650FMKOE332

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County FireFire Operations – PL 67.0 Grant, PL 97.4 Elliott, PL 114.8 Villisca, PL 229.1 Red Oak154.3100
In 158.8650
FMKBG636

EMS Dispatch

EMS Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County EMSHospital155.2350FMKNIV324

Montgomery County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Montgomery County FireFire Operations45023afdfT
Montgomery County FireMontgomery County Fire – Tactical Channel45024afe0T
Montgomery County FireMontgomery County Fire – Tactical Channel45025afe1T
Montgomery County HospitalMemorial Hospital45028afe4T

Radio system sites in Montgomery County

Program the control channel first; your scanner finds the voice channels from it.

Montgomery Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 48 (hex 30)
Control 770.93125, 774.55625, 774.80625
Voice 770.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Montgomery County

Common questions

What frequency does the fire department use in Montgomery County?

Fire dispatch channels listed for Montgomery County: Montgomery County Fire 155.8650 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Montgomery County?

EMS dispatch channels listed for Montgomery County: Montgomery County EMS 155.2350 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Montgomery County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Montgomery County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Montgomery County?

For Montgomery County, start with the Montgomery Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.93125, 774.55625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Montgomery County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Montgomery County are marked encrypted.

Are Montgomery County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Montgomery County are marked encrypted.