Skip to content

Mills County Fire and EMS Frequencies

Mills County in Iowa has 3 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Mills County Fire and EMS Frequencies

Quick answer: Fire dispatch for Mills County: Mills County Fire 154.2500 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Mills County Fire talkgroup 43906 (hex ab82).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Mills County, start with the Underwood/Mills Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 769.95625, 770.20625, 770.45625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Mills County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Mills County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mills County FireMills County Fire – Dispatch154.2500
In 153.8300
CSQFMNWPIY684

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Mills County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mills County FireMills County Fire – Fire Ground153.9650FMN—

Fire Talk-around

Fire Talk-around frequencies for Mills County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mills County FireFire Training155.2350FMNWZJ688

Mills County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Mills County FireMills County Fire – Dispatch43906ab82T
Mills County FireMills County Fire – Fire Ground43907ab83T
Mills County FireMills County Fire – Fire Ground43908ab84T
Mills County FireMills County Fire – Fire Ground43909ab85T
Mills County FireFire Event43910ab86T
1 encrypted talkgroup (cannot be monitored)
Iowa Statewide Interoperable Communications System (ISICS) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Mills County FireFire/EMS Tactical43929ab99T Encrypted

Radio system sites in Mills County

Program the control channel first; your scanner finds the voice channels from it.

Underwood/Mills Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 10 (hex A) · NAC 4C0
Control 769.95625, 770.20625, 770.45625
Voice 769.45625, 769.70625, 769.71875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Mills County

Common questions

What frequency does the fire department use in Mills County?

Fire dispatch channels listed for Mills County: Mills County Fire 154.2500 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Mills County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Mills County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Mills County?

For Mills County, start with the Underwood/Mills Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.95625, 770.20625, 770.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Mills County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Mills County are marked encrypted.

Are Mills County fire and EMS talkgroups encrypted?

1 of the 6 talkgroups listed for Mills County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.