Skip to content

Cotter Fire and EMS Frequencies

We do not have frequencies listed specifically for Cotter in Louisa County, Iowa yet. Countywide channels for Louisa County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Conesville (Iowa Statewide Interoperable Communications System (ISICS)), about 8 miles away.

About Cotter Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cotter: Louisa County Fire 154.1450 MHz, narrow FM, 156.7 PL; RF Remote Links Fire 458.3000 MHz, narrow FM, 071 DPL. County-level ems dispatch that covers Cotter: Louisa County EMS 155.3250 MHz, narrow FM, 192.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Louisa County channels that also cover Cotter

Fire Dispatch

Fire Dispatch frequencies for Louisa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Louisa County FireLouisa County Fire – Dispatch154.1450156.7 PLFMNKLV936
RF Remote Links FireRF Remote Links Fire – Dispatch – Mobile to Base Relay458.3000071 DPLFMNKLV936

EMS Dispatch

EMS Dispatch frequencies for Louisa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Louisa County EMSLouisa County EMS – Dispatch155.3250192.8 PLFMNWPBQ829

Nearest trunked radio sites

Distances are measured from the center of Cotter.

Conesville · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 70 (hex 46) · about 8 mi away
Control 856.5375
Voice 854.0375, 854.3375, 855.4875
Louisa · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 58 (hex 3A) · NAC 4C5 · about 16 mi away
Control 773.05625, 773.30625, 773.80625, 774.05625, 774.30625
West Liberty · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 148 (hex 94) · NAC 4C1 · about 22 mi away
Control 856.1625
Voice 854.2875, 854.6875, 857.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cotter?

We do not have a fire dispatch channel listed specifically for Cotter. The county-level fire dispatch channels in the same county: Louisa County Fire 154.1450 MHz, narrow FM, 156.7 PL; RF Remote Links Fire 458.3000 MHz, narrow FM, 071 DPL.

What frequency does EMS or the ambulance service use in Cotter?

We do not have a EMS dispatch channel listed specifically for Cotter. The county-level EMS dispatch channels in the same county: Louisa County EMS 155.3250 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Cotter?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Cotter?

For Cotter, start with the Conesville site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 856.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.