Skip to content

Bertram Fire and EMS Frequencies

We do not have frequencies listed specifically for Bertram in Linn County, Iowa yet. Countywide channels for Linn County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Linn/Johnson Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 10 miles away.

About Bertram Fire and EMS Frequencies

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Linn County channels that also cover Bertram

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County FireCounty Fire Mutual Aid – Patched to SARA154.4300192.8 PLFMNKFA423

Hospitals & Medical

Hospitals & Medical frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
St Lukes, Mercy ER, and Lifeguard HelicopterEMS F155.2200192.8 PLFMNKNFH931
St Lukes, Mercy ER, and Lifeguard HelicopterEMS F155.2800192.8 PLFMNWPTI686

Nearest trunked radio sites

Distances are measured from the center of Bertram.

Linn/Johnson Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 13 (hex D) · NAC 4C0 · about 10 mi away
Control 769.91875, 770.16875, 770.41875
Voice 769.66875
Anamosa · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 49 (hex 31) · NAC 4C4 · about 20 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
Williamsburg · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 45 (hex 2D) · NAC 4C1 · about 30 mi away
Control 774.06875, 774.31875, 774.81875
Voice 774.56875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Bertram?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bertram?

For Bertram, start with the Linn/Johnson Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.91875, 770.16875, 770.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.