Skip to content

Keokuk County Fire and EMS Frequencies

Keokuk County in Iowa has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 16 cities and communities below for local fire departments and EMS agencies.

About Keokuk County Fire and EMS Frequencies

Quick answer: Fire dispatch for Keokuk County: Keokuk County Fire 154.1600 MHz, narrow FM, 146.2 PL. EMS dispatch for Keokuk County: Keokuk County EMS 151.2200 MHz, narrow FM, 203.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Keokuk County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Keokuk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Keokuk County FireKeokuk County Fire – Dispatch154.1600
In 159.3750
146.2 PLFMNWXB820

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Keokuk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Keokuk County FireKeokuk County Fire – Fire Ground155.7225114 DPLFMNWXB820

EMS Dispatch

EMS Dispatch frequencies for Keokuk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Keokuk County EMSKeokuk County EMS – Dispatch151.2200
In 159.0450
203.5 PLFMNWQAS374

Radio system sites in Keokuk County

Program the control channel first; your scanner finds the voice channels from it.

Sigourney · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 52 (hex 34) · NAC 4C4
Control 769.95625, 770.20625, 770.45625
Voice 769.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Keokuk County

Common questions

What frequency does the fire department use in Keokuk County?

Fire dispatch channels listed for Keokuk County: Keokuk County Fire 154.1600 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Keokuk County?

EMS dispatch channels listed for Keokuk County: Keokuk County EMS 151.2200 MHz, narrow FM, 203.5 PL.

What scanner do I need to listen to fire and EMS in Keokuk County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Keokuk County?

For Keokuk County, start with the Sigourney site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.95625, 770.20625, 770.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Keokuk County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Keokuk County are marked encrypted.