About Monroe Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Monroe: Jasper County Fire 154.1900 MHz, narrow FM, 107.2 PL; RF Remote Links Fire 453.3125 MHz, narrow FM, 192.8 PL.
- 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Jasper County channels that also cover Monroe
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jasper County Fire | Jasper County Fire – Dispatch – Baxter | 154.1900 In 158.7450 | 107.2 PL | FMN | WPVC738 |
| Jasper County Fire | Jasper County Fire – Dispatch – Newton – Patched to SARA | 154.3550 In 159.2475 | 136.5 PL | FMN | KD47984 |
| Jasper County Fire | Jasper County Fire – Dispatch – Reasnor/Monroe – Patched to SARA | 154.4150 In 158.8575 | 173.8 PL | FMN | KNCG838 |
| Jasper County Fire | Jasper County Fire – Dispatch – Prairie City – Patched to SARA | 154.4150 In 158.8575 | 186.2 PL | FMN | KNCG838 |
| Jasper County Fire | Jasper County Fire – Dispatch – Sully/Lynnville – Patched to SARA | 154.4150 In 158.8575 | 203.5 PL | FMN | KNCG838 |
| Jasper County Fire | Jasper County Fire – Dispatch – Kellogg | 154.4150 In 158.8575 | 162.2 PL | FMN | KNCG838 |
| Jasper County Fire | Jasper County Fire – Dispatch – Colfax/Mingo – Patched to SARA | 156.1575 In 151.4225 | 151.4 PL | FMN | WQOE321 |
| RF Remote Links Fire | Remote Relay for Fire Dispatch – Monroe Tower | 453.3125 | 192.8 PL | FMN | WQIT353 |
| RF Remote Links Fire | Remote Relay for Fire Dispatch – Prairie City Tower | 453.3125 | 173.8 PL | FMN | WQIT353 |
| RF Remote Links Fire | Remote Relay for Fire Dispatch – Sully Tower | 453.3125 | 203.5 PL | FMN | WQIT353 |
| RF Remote Links Fire | Remote Relay for Fire Dispatch – Kellogg Tower | 453.3125 | 186.2 PL | FMN | WQIT353 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jasper County Fire | Jasper County Fire – Fire Ground | 155.3250 | 107.2 PL | FMN | KNCG838 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jasper County Hospital | Skiff Medical Center | 155.4000 | 82.5 PL | FMN | WQFK217 |
Nearest trunked radio sites
Distances are measured from the center of Monroe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Monroe?
We do not have a fire dispatch channel listed specifically for Monroe. The county-level fire dispatch channels in the same county: Jasper County Fire 154.1900 MHz, narrow FM, 107.2 PL; RF Remote Links Fire 453.3125 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in Monroe?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Monroe?
For Monroe, start with the Newton site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.44375, 770.69375, 770.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.