About Persia Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Persia: Harrison County Fire 154.3700 MHz, narrow FM, 141.3 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Persia Fire talkgroup 31894 (hex 7c96).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup; Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Persia, start with the Logan site of Iowa Statewide Interoperable Communications System (ISICS), about 13 miles away. Its control channels: 770.15625, 770.40625, 770.90625 MHz.
Data updated .
Persia trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Persia Fire | Persia Fire/Rescue Paging | 31894 | 7c96 | T |
Harrison County channels that also cover Persia
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harrison County Fire | Harrison County Fire – Dispatch | 154.3700 | 141.3 PL | FMN | WZW935 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Harrison County Fire | Fire Operations | 31924 | 7cb4 | T |
Nearest trunked radio sites
Distances are measured from the center of Persia.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Persia?
We do not have a fire dispatch channel listed specifically for Persia. The county-level fire dispatch channels in the same county: Harrison County Fire 154.3700 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Persia?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Persia?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Persia?
For Persia, start with the Logan site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.15625, 770.40625, 770.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Persia fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Persia are marked encrypted.