Skip to content

Franklin County Fire and EMS Frequencies

Franklin County in Iowa has 3 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 10 cities and communities below for local fire departments and EMS agencies.

About Franklin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Franklin County: Franklin County Fire 154.3250 MHz, FM, 127.3 PL. EMS dispatch for Franklin County: Franklin County EMS 155.3400 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Franklin County Fire talkgroup 30009 (hex 7539).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin County, start with the Latimer site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 769.95625, 770.20625, 770.45625 MHz.

Data updated .

Franklin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireFranklin County Fire – Dispatch154.3250127.3 PLFMKVP439

EMS Dispatch

EMS Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County EMSFranklin County EMS – Dispatch155.3400FMKBP554

Hospitals & Medical

Hospitals & Medical frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County HospitalFranklin County General Hospital155.4000
In 159.1350
FMWQJV676

Franklin County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Franklin County FireFranklin County Fire – Dispatch /Operations300097539T
Franklin County FireFranklin County Fire – Tactical Channel30010753aT
Franklin County FireFranklin County Fire – Tactical Channel30011753bT
Franklin County EMSFranklin General Hospital/Ambulance30013753dT
Franklin County EMSCounty Emergency Squad30014753eT

Radio system sites in Franklin County

Program the control channel first; your scanner finds the voice channels from it.

Latimer · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 33 (hex 21) · NAC 4C3
Control 769.95625, 770.20625, 770.45625
Voice 769.20625, 769.45625, 769.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Franklin County

Common questions

What frequency does the fire department use in Franklin County?

Fire dispatch channels listed for Franklin County: Franklin County Fire 154.3250 MHz, FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Franklin County?

EMS dispatch channels listed for Franklin County: Franklin County EMS 155.3400 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Franklin County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Franklin County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Franklin County?

For Franklin County, start with the Latimer site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.95625, 770.20625, 770.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Franklin County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Franklin County are marked encrypted.

Are Franklin County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Franklin County are marked encrypted.