About Elgin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Elgin: Fayette County Fire 154.1600 MHz, narrow FM, 073 DPL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Fayette County Fire talkgroup 29315 (hex 7283).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Elgin, start with the West Union site of Iowa Statewide Interoperable Communications System (ISICS), about 9 miles away. Its control channels: 769.93125, 770.18125, 770.43125 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Fayette County channels that also cover Elgin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fayette County Fire | Fire/EMS Paging | 154.1600 In 158.9550 | 073 DPL | FMN | WPQG811 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fayette County Fire | Fire Main | 29315 | 7283 | T |
| Fayette County Fire | Fayette County Fire – Fire Ground | 29316 | 7284 | T |
| Fayette County Fire | Fayette County Fire – Fire Ground | 29317 | 7285 | T |
| Fayette County Fire | Fayette County Fire – Fire Ground | 29318 | 7286 | T |
| Fayette County EMS | EMS Main | 29320 | 7288 | T |
| Fayette County EMS | Fayette County EMS – Tactical Channel | 29321 | 7289 | T |
| Fayette County EMS | Fayette County EMS – Tactical Channel | 29322 | 728a | T |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fayette County Fire | Fayette County Fire – Fire Ground | 29319 | 7287 | T Encrypted |
| Fayette County EMS | Fayette County EMS – Tactical Channel | 29323 | 728b | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Elgin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Elgin?
We do not have a fire dispatch channel listed specifically for Elgin. The county-level fire dispatch channels in the same county: Fayette County Fire 154.1600 MHz, narrow FM, 073 DPL.
Do fire departments and EMS use a trunked radio system in Elgin?
Yes. The county-level systems that cover Elgin are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Elgin?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Elgin?
For Elgin, start with the West Union site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.93125, 770.18125, 770.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.