About Emmet County Fire and EMS Frequencies
Quick answer: Fire dispatch for Emmet County: Emmet County Fire 154.3850 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Emmet County Fire talkgroup 29110 (hex 71b6).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Emmet County, start with the Estherville site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 769.94375, 770.19375, 770.44375 MHz.
Data updated .
Emmet County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emmet County Fire | Emmet County Fire – Dispatch | 154.3850 In 159.2250 | FM | KNEP905 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emmet County Hospital | Emmet County Hospital – Hospital Channel | 155.4000 | 82.5 PL | FM | WPNW792 |
Emmet County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Emmet County Fire | Fire/EMS Dispatch | 29110 | 71b6 | T |
Radio system sites in Emmet County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Emmet County
Common questions
What frequency does the fire department use in Emmet County?
Fire dispatch channels listed for Emmet County: Emmet County Fire 154.3850 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Emmet County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Emmet County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Emmet County?
For Emmet County, start with the Estherville site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.94375, 770.19375, 770.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Emmet County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Emmet County are marked encrypted.
Are Emmet County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Emmet County are marked encrypted.