Skip to content

Cascade Fire and EMS Frequencies

We do not have frequencies listed specifically for Cascade in Dubuque County, Iowa yet. Countywide channels for Dubuque County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dubuque Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 16 miles away.

Cascade also extends into Jones County.

About Cascade Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cascade: Dubuque County Fire 154.1750 MHz, FM, CSQ.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Dubuque County channels that also cover Cascade

Fire Dispatch

Fire Dispatch frequencies for Dubuque County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dubuque County FireDubuque County Fire – Dispatch154.1750CSQFMKQT999

Nearest trunked radio sites

Distances are measured from the center of Cascade.

Dubuque Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 9 (hex 9) · NAC 4C0 · about 16 mi away
Control 769.94375, 770.19375, 770.44375
Voice 769.69375
Anamosa · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 49 (hex 31) · NAC 4C4 · about 17 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
Maquoketa · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 62 (hex 3E) · NAC 4C0 · about 20 mi away
Control 769.40625, 770.15625, 770.40625
Voice 769.15625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cascade?

We do not have a fire dispatch channel listed specifically for Cascade. The county-level fire dispatch channels in the same county: Dubuque County Fire 154.1750 MHz, FM, CSQ.

What scanner do I need to listen to fire and EMS in Cascade?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Cascade?

For Cascade, start with the Dubuque Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.94375, 770.19375, 770.44375 MHz. Program a control channel first; the scanner finds the voice channels from it.