Skip to content

Dickinson County Fire and EMS Frequencies

Dickinson County in Iowa has 8 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 10 cities and communities below for local fire departments and EMS agencies.

About Dickinson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dickinson County: Dickinson County Fire 154.2050 MHz, narrow FM, 167.9 PL. EMS dispatch for Dickinson County: Dickinson County EMS 155.8650 MHz, narrow FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Dickinson County Fire talkgroup 27350 (hex 6ad6).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dickinson County, start with the Dickinson Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 770.93125, 774.55625, 774.80625 MHz.

Data updated .

Dickinson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County FireFire & EMS Paging154.2050167.9 PLFMNWPMX240

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County FireLaw/Fire/EMS/Public Works Interop151.3250
In 159.2550
FMNWPFT646
Dickinson County FireDC 1 – Law/Fire/EMS Event154.0550FMNKAW641
Dickinson County FireDC 3 – Law/Fire/EMS Event155.8050167.9 PLFMNKZ8720
Dickinson County FireDC 2 – Law/Fire/EMS Event156.0150FMNKQF754
Dickinson County FireFire Operations159.3300
In 153.8150
82.5 PLFMNWPMX240

EMS Dispatch

EMS Dispatch frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County EMSHospital Pagers155.8650FMNKAX262

EMS Talk-around

EMS Talk-around frequencies for Dickinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dickinson County EMSEMS Reports155.400082.5 PLFMNWRA636

Dickinson County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Dickinson County FireFire/EMS Paging273506ad6T
Dickinson County FireDickinson County Fire – Fire Ground273106aaeT

Radio system sites in Dickinson County

Program the control channel first; your scanner finds the voice channels from it.

Dickinson Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 30 (hex 1E) · NAC 4C0
Control 770.93125, 774.55625, 774.80625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dickinson County

Common questions

What frequency does the fire department use in Dickinson County?

Fire dispatch channels listed for Dickinson County: Dickinson County Fire 154.2050 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Dickinson County?

EMS dispatch channels listed for Dickinson County: Dickinson County EMS 155.8650 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Dickinson County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dickinson County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dickinson County?

For Dickinson County, start with the Dickinson Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.93125, 774.55625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dickinson County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Dickinson County are marked encrypted.

Are Dickinson County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Dickinson County are marked encrypted.