About Dundee Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dundee: Delaware County Fire 151.4450 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Dundee: Delaware County EMS 155.2200 MHz, narrow FM, 192.8 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Delaware County channels that also cover Dundee
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Delaware County Fire | Delaware County Fire – Also used at Backbone Park by conservation | 151.4450 In 158.9850 | 100.0 PL | FMN | WQGZ953 |
| Delaware County Fire | Delaware County Fire – Dispatch | 154.3550 In 159.2700 | 179.9 PL | FMN | KNCX756 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Delaware County Fire | Delaware County Fire – Fire Ground – Tactical | 155.0850 | 91.5 PL | FMN | KGR210 |
| Delaware County Fire | V-Tactical | 155.8200 | FMN | — | |
| Delaware County Fire | Delaware County Fire – Fire Ground – Tactical | 156.1350 | 82.5 PL | FMN | KGR210 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Delaware County EMS | Regional Medical Center – Manchester | 155.2200 | 192.8 PL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Dundee.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dundee?
We do not have a fire dispatch channel listed specifically for Dundee. The county-level fire dispatch channels in the same county: Delaware County Fire 151.4450 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in Dundee?
We do not have a EMS dispatch channel listed specifically for Dundee. The county-level EMS dispatch channels in the same county: Delaware County EMS 155.2200 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in Dundee?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Dundee?
For Dundee, start with the Independence site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.78125, 774.03125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.