Skip to content

Dallas County Fire and EMS Frequencies

Dallas County in Iowa has 5 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Dallas County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dallas County: Dallas County Fire 154.4450 MHz, narrow FM, 125 DPL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Dallas County Fire talkgroup 24631 (hex 6037).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dallas County, start with the Dallas Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 771.00625, 771.28125, 771.55625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Dallas County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dallas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dallas County FireDallas County Fire – Dispatch154.4450125 DPLFMNWNQM827

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dallas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dallas County FirePublic Safety 3 – Fire and EMS Talkaround channel153.7400125 DPLFMNKAA879
Dallas County FirePublic Safety 1 – Fire and EMS Talkaround channel153.7850125 DPLFMNWPZT773
Dallas County FirePublic Safety 4 – Fire and EMS talkaround channel155.8500125 DPLFMNKAA879
Dallas County FirePublic Safety 2 – Fire and EMS Talkaround channel159.4200125 DPLFMNWPZT773

Dallas County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Dallas County FireFire/EMS Operations246316037T
Dallas County FireFire/EMS Paging2475660b4T
Dallas County FireWoodward Local Government2474260a6T
Dallas County EMSDallas County EMS – Tactical Channel246756063T
1 encrypted talkgroup (cannot be monitored)
Iowa Statewide Interoperable Communications System (ISICS) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Dallas County EMSCar to Car246486048T Encrypted

Radio system sites in Dallas County

Program the control channel first; your scanner finds the voice channels from it.

Dallas Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 17 (hex 11) · NAC 4C0
Control 771.00625, 771.28125, 771.55625
Voice 769.59375, 770.06875, 770.53125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dallas County

Common questions

What frequency does the fire department use in Dallas County?

Fire dispatch channels listed for Dallas County: Dallas County Fire 154.4450 MHz, narrow FM, 125 DPL.

Do fire departments and EMS use a trunked radio system in Dallas County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dallas County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dallas County?

For Dallas County, start with the Dallas Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 771.00625, 771.28125, 771.55625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dallas County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Dallas County are marked encrypted.

Are Dallas County fire and EMS talkgroups encrypted?

1 of the 5 talkgroups listed for Dallas County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.