Skip to content

Clayton County Fire and EMS Frequencies

Clayton County in Iowa has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 17 cities and communities below for local fire departments and EMS agencies.

About Clayton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Clayton County: Clayton County Fire 152.0075 MHz, FM, no tone. EMS dispatch for Clayton County: Clayton County EMS 155.2350 MHz, FM, 110.9 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Clayton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Clayton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clayton County FireFire and EMS Paging152.0075FMWQOM476
Clayton County FireFire/EMS Response – linked with 156.2175154.3250032 DPLFMNWQEC234

EMS Dispatch

EMS Dispatch frequencies for Clayton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clayton County EMSOld EMS155.2350110.9 PLFMWQEC234

Radio system sites in Clayton County

Program the control channel first; your scanner finds the voice channels from it.

Elkader · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 26 (hex 1A) · NAC 4C0
Control 773.81875, 774.06875, 774.31875
Voice 773.56875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Clayton County

Common questions

What frequency does the fire department use in Clayton County?

Fire dispatch channels listed for Clayton County: Clayton County Fire 152.0075 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Clayton County?

EMS dispatch channels listed for Clayton County: Clayton County EMS 155.2350 MHz, FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Clayton County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Clayton County?

For Clayton County, start with the Elkader site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.81875, 774.06875, 774.31875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Clayton County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Clayton County are marked encrypted.