About Chickasaw County Fire and EMS Frequencies
Quick answer: Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Chickasaw County Fire talkgroup 22531 (hex 5803).
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Chickasaw County, start with the Chickasaw Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 769.96875, 770.21875, 770.46875 MHz.
Data updated .
Chickasaw County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Chickasaw County Fire | Fire Main | 22531 | 5803 | T |
| Chickasaw County Fire | Chickasaw County Fire – Fire Ground | 22532 | 5804 | T |
| Chickasaw County Fire | Frederickburg Fire Tactical | 22537 | 5809 | T |
| Chickasaw County EMS | EMS Main | 22528 | 5800 | T |
| Chickasaw County EMS | Chickasaw County EMS – Tactical Channel | 22529 | 5801 | T |
Radio system sites in Chickasaw County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Chickasaw County
Common questions
Do fire departments and EMS use a trunked radio system in Chickasaw County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Chickasaw County?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Chickasaw County?
For Chickasaw County, start with the Chickasaw Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.96875, 770.21875, 770.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Chickasaw County fire and EMS talkgroups encrypted?
None of the 5 talkgroups listed for Chickasaw County are marked encrypted.