Skip to content

Durant Fire and EMS Frequencies

Durant in Cedar County, Iowa has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Muscatine/Scott Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 6 miles away.

Durant also extends into Muscatine County, Scott County.

About Durant Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Durant: Cedar County Fire 154.4150 MHz, narrow FM, 141.3 PL. EMS dispatch for Durant: Durant EMS 152.4200 MHz, narrow FM, 074 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Durant conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Durant
AgencyDescriptionFrequency (MHz)ToneModeFCC
Durant EMSDurant EMS – Dispatch152.4200
In 157.6800
074 DPLFMNWQIA351

Cedar County channels that also cover Durant

Fire Dispatch

Fire Dispatch frequencies for Cedar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cedar County FireCedar County Fire – Dispatch154.4150
In 156.1500
141.3 PLFMNWPUL705
Cedar County FireFire Operations154.4150
In 156.1500
NAC 064P25WPUL705

Nearest trunked radio sites

Distances are measured from the center of Durant.

Muscatine/Scott Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 14 (hex E) · NAC 4C0 · about 6 mi away
Control 773.83125, 774.08125, 774.33125
Voice 773.58125
Wilton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 149 (hex 95) · NAC 4C3 · about 6 mi away
Control 857.5375
Voice 854.4125, 856.1875, 858.5375
Muscatine - Wildcat Den State Park · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 147 (hex 93) · about 9 mi away
Control 853.625
Voice 851.65, 852.1125, 852.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Durant?

We do not have a fire dispatch channel listed specifically for Durant. The county-level fire dispatch channels in the same county: Cedar County Fire 154.4150 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Durant?

EMS dispatch channels listed for Durant: Durant EMS 152.4200 MHz, narrow FM, 074 DPL.

What scanner do I need to listen to fire and EMS in Durant?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Durant?

For Durant, start with the Muscatine/Scott Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.83125, 774.08125, 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Durant fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Durant are marked encrypted.