Skip to content

Clarence Fire and EMS Frequencies

We do not have frequencies listed specifically for Clarence in Cedar County, Iowa yet. Countywide channels for Cedar County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Anamosa (Iowa Statewide Interoperable Communications System (ISICS)), about 20 miles away.

About Clarence Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Clarence: Cedar County Fire 154.4150 MHz, narrow FM, 141.3 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Cedar County channels that also cover Clarence

Fire Dispatch

Fire Dispatch frequencies for Cedar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cedar County FireCedar County Fire – Dispatch154.4150
In 156.1500
141.3 PLFMNWPUL705
Cedar County FireFire Operations154.4150
In 156.1500
NAC 064P25WPUL705

Nearest trunked radio sites

Distances are measured from the center of Clarence.

Anamosa · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 49 (hex 31) · NAC 4C4 · about 20 mi away
Control 773.84375, 774.09375, 774.34375
Voice 773.59375
Wilton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 149 (hex 95) · NAC 4C3 · about 20 mi away
Control 857.5375
Voice 854.4125, 856.1875, 858.5375
Maquoketa · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 62 (hex 3E) · NAC 4C0 · about 22 mi away
Control 769.40625, 770.15625, 770.40625
Voice 769.15625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Clarence?

We do not have a fire dispatch channel listed specifically for Clarence. The county-level fire dispatch channels in the same county: Cedar County Fire 154.4150 MHz, narrow FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Clarence?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Clarence?

For Clarence, start with the Anamosa site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.84375, 774.09375, 774.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.