About Calhoun County Fire and EMS Frequencies
Quick answer: Fire dispatch for Calhoun County: Calhoun County Fire 154.1750 MHz, narrow FM, 155 DPL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Calhoun County Fire talkgroup 20407 (hex 4fb7).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Calhoun County, start with the Calhoun Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 769.90625, 770.15625, 770.40625 MHz.
Data updated .
Calhoun County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Calhoun County Fire | Calhoun County Fire – Dispatch | 154.1750 In 154.0100 | 155 DPL | FMN | WPZX783 |
Calhoun County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Calhoun County Fire | Fire/EMS Operations | 20407 | 4fb7 | T |
| Calhoun County Fire | Fire/EMS Page | 20414 | 4fbe | T |
| Calhoun County Fire | Fire/EMS Tactical | 20408 | 4fb8 | T |
| Calhoun County Fire | Fire/EMS Tactical | 20415 | 4fbf | T |
| Calhoun County Fire | Fire/EMS Tactical | 20423 | 4fc7 | T |
| Calhoun County EMS | EMS Talk | 20405 | 4fb5 | T |
Radio system sites in Calhoun County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Calhoun County
Common questions
What frequency does the fire department use in Calhoun County?
Fire dispatch channels listed for Calhoun County: Calhoun County Fire 154.1750 MHz, narrow FM, 155 DPL.
Do fire departments and EMS use a trunked radio system in Calhoun County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Calhoun County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Calhoun County?
For Calhoun County, start with the Calhoun Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.90625, 770.15625, 770.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Calhoun County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Calhoun County are marked encrypted.
Are Calhoun County fire and EMS talkgroups encrypted?
None of the 6 talkgroups listed for Calhoun County are marked encrypted.