Skip to content

Butler County Fire and EMS Frequencies

Butler County in Iowa has 4 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 10 cities and communities below for local fire departments and EMS agencies.

About Butler County Fire and EMS Frequencies

Quick answer: Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Butler County Fire talkgroup 20103 (hex 4e87).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Butler County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireButler County Fire – Tactical Channel153.9650FMNWQKM507
Butler County FireButler County Fire – Tactical Channel156.0150FMNWQKM507
Butler County FireButler County Fire – Tactical Channel158.9250FMNWQKM507
Butler County FireFire Response159.3450
In 153.8150
210.7 PLFMNWQKL567

Butler County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Butler County FireDispatch and Response201034e87T
Butler County EMSDispatch and Response201074e8bT

Radio system sites in Butler County

Program the control channel first; your scanner finds the voice channels from it.

Butler · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 12 (hex C)
Voice 774.34375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Butler County

Common questions

Do fire departments and EMS use a trunked radio system in Butler County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Butler County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

Are Butler County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Butler County are marked encrypted.

Are Butler County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Butler County are marked encrypted.