Skip to content

Black Hawk County Fire and EMS Frequencies

Black Hawk County in Iowa has 0 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 10 cities and communities below for local fire departments and EMS agencies.

About Black Hawk County Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Black Hawk County yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@scanner-frequencies.com and we'll check it against the official records.

Radio system sites in Black Hawk County

Program the control channel first; your scanner finds the voice channels from it.

BlackHawk/Bremer Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 12 (hex C) · NAC 4C0
Control 773.80625, 774.05625, 774.30625
Voice 773.55625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Black Hawk County

Common questions

What are the control channels for trunked radio in Black Hawk County?

For Black Hawk County, start with the BlackHawk/Bremer Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.80625, 774.05625, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.