About White County Fire and EMS Frequencies
Quick answer: Fire dispatch for White County: Fire/EMS/Emergency Management 151.3775 MHz, narrow FM, no tone. EMS dispatch for White County: Fire/EMS/Emergency Management 462.9500 MHz, narrow FM, 127.3 PL. Trunked: Indiana Project Hoosier SAFE-T, for example White County Fire talkgroup 12465 (hex 30b1).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For White County, start with the Lake Shafer site of Indiana Project Hoosier SAFE-T. Its control channels: 773.48125, 774.13125 MHz.
Data updated .
White County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Wolcott Fire – Dispatch | 151.3775 In 159.2775 | FMN | KCY794 | |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Dispatch (Countywide) | 154.2500 | 162 DPL | FMN | WPDG642 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Emergency Management (EMA Backup) | 154.1150 | FMN | KSU662 | |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Operations (Countywide) | 154.1600 | 162 DPL | FMN | WPDG642 |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Operations (Countywide) | 154.2050 | FMN | WPDG642 | |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Operations (Countywide) | 154.4450 | FMN | WPDG642 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Wolcott EMS – Dispatch | 462.9500 In 467.9500 | 127.3 PL | FMN | WSIN289 |
White County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| White County Fire | White County Fire – Dispatch (Countywide) | 12465 | 30b1 | D |
| White County EMS | White County EMS – Operations (County) | 12461 | 30ad | D |
Radio system sites in White County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in White County
- Badger Grove
- Bell Center
- Big Creek
- Brookston
- Buffalo
- Burnettsville
- Cass
- Cedar Point
- Chalmers
- East Monticello
- Golden Hill
- Guernsey
- Headlee
- Honey Creek
- Idaville
- Indiana Beach
- Jackson
- Lee
- Liberty
- Lincoln
- Monon
- Monticello
- Norway
- Prairie
- Princeton
- Reynolds
- Round Grove
- Seafield
- Sitka
- Smithson
- Springboro
- Union
- West Point
- Wolcott
Common questions
What frequency does the fire department use in White County?
Fire dispatch channels listed for White County: Fire/EMS/Emergency Management 151.3775 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in White County?
EMS dispatch channels listed for White County: Fire/EMS/Emergency Management 462.9500 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in White County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in White County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in White County?
For White County, start with the Lake Shafer site of Indiana Project Hoosier SAFE-T. Its control channels are 773.48125, 774.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are White County fire and EMS frequencies encrypted?
None of the 7 conventional frequencies listed for White County are marked encrypted.
Are White County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for White County are marked encrypted.