About Wells County Fire and EMS Frequencies
Quick answer: Fire dispatch for Wells County: Wells County Fire 154.1750 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Wells County Fire talkgroup 12451 (hex 30a3).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wells County, start with the Bluffton site of Indiana Project Hoosier SAFE-T. Its control channels: 858.9625, 859.9625 MHz.
Data updated .
Wells County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wells County Fire | Wells County Fire – Dispatch | 154.1750 | 82.5 PL | FMN | WNHI522 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wells County Fire | Wells County Fire – Fire Ground | 153.9800 | 82.5 PL | FMN | KNDN884 |
| Wells County Fire | Wells County Fire – Fire Ground | 154.2800 | CSQ | FMN | KNDN884 |
Wells County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wells County Fire | Wells County Fire – Dispatch (County) | 12451 | 30a3 | D |
| Wells County Fire | Wells County Fire – Operations (County) | 12452 | 30a4 | D |
| Wells County Fire | Wells County Fire – Operations (County) | 12453 | 30a5 | D |
| Wells County EMS | Wells County EMS – Dispatch (County) | 12450 | 30a2 | D |
Radio system sites in Wells County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Wells County
- Bluffton
- Chester
- Craigville
- Curryville
- Dillman
- Domestic
- Five Points
- Greenville
- Greenwood
- Harrison
- Jackson
- Jeff
- Jefferson
- Keystone
- Kingsland
- Lancaster
- Liberty
- Liberty Center
- Markle
- McNatts
- Mount Zion
- Murray
- North Oaks
- Nottingham
- Ossian
- Petroleum
- Phenix
- Poneto
- Reiffsburg
- Riverside
- Rockcreek
- Rockford
- Tocsin
- Toll Gate Heights
- Travisville
- Union
- Uniondale
- Vera Cruz
- Wellsburg
- Zanesville
Common questions
What frequency does the fire department use in Wells County?
Fire dispatch channels listed for Wells County: Wells County Fire 154.1750 MHz, narrow FM, 82.5 PL.
Do fire departments and EMS use a trunked radio system in Wells County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wells County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wells County?
For Wells County, start with the Bluffton site of Indiana Project Hoosier SAFE-T. Its control channels are 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wells County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Wells County are marked encrypted.
Are Wells County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Wells County are marked encrypted.